Wang, Ming-Shyan
Name: Ming-Shyan Wang
Title: Distinguished Professor and Vice Dean of College
of Engineer
Degree: Ph. D., Electrical Engineering,
National Cheng Kung University
Email: mswang@stust.edu.tw
Extension: 3328, 3002
Office: B200
Research: Control system design and
applications of intelligent roots, Neural network system control, AC servomotor
drive system design and control
Courses: Advanced servo control,
Automatic control systems I, II
Journal articles
2017
school
year
1. Narongrit Pimkumwong
and Ming-Shyan Wang*, “Full-order observer for direct torque control of
induction motor based on constant V/F control technique,” ISA Transactions, Vol. 73, pp. 189-200, Feb. 20, 2018 (SCI, ENGINEERING, MULTIDISCIPLINARY,
8/85 = 9.4%, Impact factor: 3.394). MOST 106-2221-E-218-002-
2. Ming-Shyan
Wang* and Tse-Ming Tsai, “Sliding Mode and Neural Network Control of
Sensorless PMSM Controlled System for Power Consumption and Performance
Improvement,” Energies, 2017, 10 (11), 1780; doi:
10.3390/en10111780 (SCI, ENERGY &
FUELS, 42/86 = 48.8%, Impact factor: 2.262). MOST 105-2221-E-218-017- and MOST
105-2218-E-218-002-
2016
school
year
1. Ming-Shyan
Wang*, Min-Fu Hsieh, Ika Noer Syamsiana, and Wei-Chin Fang, “Fuzzy Maximum
Torque per Ampere and Maximum Torque per Voltage Control of Interior Permanent
Magnet Synchronous Motor Drive,” Sensors and Materials, Vol. 29, No. 4, pp. 461-472, April 19, 2017 (SCI, MULTIDISCIPLINARY 86/117 = 73.5%, Impact factor: 0.489). MOST
104-2221-E-218-025-
2. Taryudi and
Ming-Shyan Wang*, “Eye to Hand Calibration Using ANFIS for Stereo
Vision-Based Object Manipulation System,” MICROSYSTEM TECHNOLOGIES -MICRO-AND NANOSYSTEMS-INFORMATION
STORAGE AND PROCESSING SYSTEMS, Vol. 23, No. 2, pp. 1-13, Feb. 8 2017, DOI 10.1007/s00542-017-3315-y (SCI,
ENGINEERING, ELECTRICAL & ELECTRONIC, 158/257 = 61.5%,
Impact factor: 0.974). (Vol. 24, No. 1, pp.
305-317, Jan. 2018) MOST
105-2221-E-218-017- and 105-2218-E-218-002-
3. Ming-Shyan Wang*, Seng-Chi Chen, and Cih-Huei Shih, “Speed Control of Brushless
DC Motor by Adaptive Network-Based Fuzzy Inference,” MICROSYSTEM TECHNOLOGIES-MICRO-AND
NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 22, No. 10, pp. 1-7, Oct. 1 2016, DOI 10.1007/s00542-016-3148-0 (SCI,
ENGINEERING, ELECTRICAL & ELECTRONIC, 158/257 = 61.5%,
Impact factor: 0.974). (Vol. 24,
No. 1, pp. 33-39, Jan. 2018) MOST 104-2221-E-218-025-
4. Ming-Shyan Wang*, Min-Fu Hsieh, Ying-Shieh Kung, and Guan Ting
Lin, “Maximum Torque per Ampere Control of IPMSM Drive by Fuzzy Logic,” MICROSYSTEM
TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 22, No. 9, pp. 1-8, Sep. 7 2016 (SCI, ENGINEERING, ELECTRICAL &
ELECTRONIC, 158/257 = 61.5%,
Impact factor: 0.974). (Vol. 24, No. 1, pp.
19-26, Jan. 2018) MOST
104-2221-E-218-025-
5. Ming-Shyan Wang*, Seng-Chi Chen, Wei-Chin Fang, and Po-Hsiang
Chuang, “Torque ripple reduction of switched reluctance motor using fuzzy
control,” Engineering Computations, Vol. 33, No. 6, pp. 1668-1679, Aug. 1 2016 (SCI, ENGINEERING, MULTIDISCIPLINARY, 55/85,
Impact factor: 0.691).
2015
school
year
1. Ming-Shyan
Wang*, Taryudi, and Shih-Hao Wang, “Signal Processing of Hall-Effect
Sensors and Its Application to Motors with Variable Windings,” Microelectronic
Engineering, Vol. 148, pp. 74-79, 1 Dec. 2015. DOI information:
10.1016/j.mee.2015. 08.010 (SCI,
ENGINEERING, ELECTRICAL & ELECTRONIC, 129/249, Impact factor: 1.197).
MOST 103-2221-E-218-033- and 98-EC-17-A-05-S1-103
2. Ming-Shyan
Wang, Seng-Chi Chen, Po-Hsiang Chuang, Shih-Yu Wu, and Fu-Shung Hsu,
“Neural Network Control-Based Drive Design of Servomotor and Its Application to
Automatic Guided Vehicle,” Mathematical Problems in Engineering, vol. 2015,
Article ID 612932, 9 pages, 2015. doi: 10.1155/2015/612932 (SCI,
ENGINEERING, MULTIDISCIPLINARY, 54/85, Impact factor: 0.762). October. MOST 103-2221-E-218-033-
2014
school
year
1. Jenq-Ruey
Horng, Ming-Shyan Wang*, Tai-Rung Lai, and Sergiu Berinde, “A Neural
Observer for the Sensorless Speed Control of Servomotors,” Engineering
Computations, Vol. 31, No. 8, pp. 1668-1678, Oct. 2014 (SCI, ENGINEERING, MULTIDISCIPLINARY, 30/87, Impact factor: 1.206). NSC 100-2632-E-218 -001 -MY3
2. Ming-Shyan
Wang, Ika Noer Syamsiana, and Feng-Chi Lin, “Sensorless Speed Control of
Permanent Magnet Synchronous Motors by Neural Network Algorithm,” Mathematical
Problems in Engineering, vol. 2014, Article ID 321892, 7 pages, Sept. 2014.
doi:10.1155/2014/321892 (SCI,
ENGINEERING, MULTIDISCIPLINARY, 33/87, Impact factor: 1.082). NSC 100-2632-E-218 -001 -MY3 and MOST
103-2221-E-218-033-
2013
school
year
1. Ming-Shyan
Wang, Che-Min Mi, Shih-Yu Wu, and Yi-Ming Tu, “DSP- and FPGA-Based
Stair-Climbing Robot Design,” Mathematical Problems in Engineering, vol. 2013,
Article ID 243094, 9 pages, 2013. doi:10.1155/2013/243094, 2013 (SCI, Impact factor: 1.383). NSC 100-2632-E-218 -001 -MY3
Conference papers
2017
school
year
1. Narongrit Pimkumwong and Ming-Shyan Wang*, “Online Speed
Estimation Using Artificial Neural Network for Speed Sensorless Direct Torque
Control of Induction Motor based on Constant V/F Control Technique,” 1st
IEEE International Conference on Knowledge Innovation and Invention 2018, Jeju Island, South Korea, July
23-27, p.126 (K180216), 2018.
2. Ming-Shyan Wang* and Hsin-Yu Lin, “Fuzzy Field Weakening Control
of IPMSM,” 2018 IEEE International Conference on
Applied System Innovation, Chiba, Japan,
April 13-17, IV11-4, paper No.: J180156.
3. Ming-Shyan Wang* and Tse-Ming Tsai, “Sensorless Motor
Control Based on Sliding-Mode Control and Neural Network Compensation,” the
sixth International Conference on Information, Communication and Engineering,
Kunming, Yunnan Province, P.R. China, Nov. 5-11, P-210, 2017.
4. Fute Lai, Ming-Shyan
Wang, and Yu-Te Huang, “Cooling of
Four-in-one Air Flow Multiplier,” 2017 International Symposium on Novel and
Sustainable Technology (2017 ISNST), Tainan, Taiwan, Oct. 19-20, 2017,
C-104-105.
2016
school
year
1. Taryudi and Ming-Shyan Wang,
“3D Object Pose Estimation Using Stereo Vision for Object Manipulation System,” 2017 IEEE
International Conference on Applied System Innovation, Osaka, Japan, May 13-17, 2017, pp.
1532 - 1535.
2. Ming-Shyan Wang, Ruei-Jhih
Hong, and Cih-Huei Shih, “Sensorless Control of Brushless DC Motor by ANFIS,” 2016 CACS
International Automatic Control Conference,
Taichung, Taiwan, Nov. 9-11, pp. 365, 2016.
3. Ming-Shyan Wang*, Ying-Shieh Kung, and Wei-Chin Fang,
“Simulation of Fuzzy MTPA and MTPV Control of IPMSM,” the Fifth International
Conference on Information, Communication and Engineering, Xi’an, Shaanxi
Province, P.R. China, Nov. 5-10, pp. 307, 2016.
4. Ming-Shyan Wang, Yu-Te Huang, and Ching-Tang Tsai, “VISUAL SERVO
TRACKING CONTROL BY CAMSHIFT,” 2016 International Symposium on Novel and Sustainable
Technology (2016 ISNST), Tainan, Taiwan, Oct. 6-7, 2016, C-05-06.
2015
school
year
1. Ming-Shyan Wang, Min-Fu
Hsieh, Ching-Tang Tsai, and Chih-Hung Wang, “Torque Control of Synchronous
Reluctance Motor by Field Oriented Control,” 2015 CACS International Automatic Control Conference, Yilan, Taiwan, Nov. 18-20, 2015, pp. 48-51.
2014
school year
1. Ming-Shyan Wang and Taryudi, “Forward
Kinematic Analysis of 6 DOF Robot Arm,” 2015 International Conference on Applied System Innovation, Osaka, Japan, May 22-27, 2015, paper No.: 1079.
2013
school
year
1. Ming-Shyan Wang, Cih-Huei
Shih, Ika Noer Syamsiana, Shih-Yu Wu, and Fu-Sung Hsu, “Neural Network
Control-Based Brushless DC Motor Drive Design for Electric Transporting Vehicle,” 2014 CACS
International Automatic Control Conference,
Kaohsiung, Taiwan, Nov. 26-28, 2014, pp. 485-487.
2. Ming-Shyan Wang, Che-Min Mi, Chich-Hung
Wang, and Pei-Lin Tsai, “Control of a Feeding Robot,” 2013 IEEE/SICE International
Symposium on System Integration, Kobe,
Japan, Dec. 15-17, pp. 624-628, 2013
(EI).
3. Ming-Shyan Wang, Chi-Jo Wang, Che-Min Mi, Feng-Chi Lin, and Tai-Rung
Lai, “Neural Network Based Sensorless Speed Controller of Permanent Magnet
Synchronous Motor,” 2013 CACS International Automatic Control Conference, Sun Moon Lake, Taiwan, Dec. 2-4, 2013, paper no.
1080.
4. Ming-Shyan Wang*, Che-Min Mi and Yi-Ming Tu, “Visual control of a
stair-climbing robot,” the Second International Conference on Information,
Communication and Engineering, Qingdao, Shandong Province, P.R. China, Oct.
26-Nov. 1, pp. 337-340, 2013.
2012
school
year
1. Chih-Hung
Wang, Ming-Shyan Wang*, and Pei-Lin Tsai, “Grasping Control of Robot Fingers
Using DSP,” 2013 International conference on Advanced Robotics and Intelligent
Systems (ARIS 2013), Tainan, Taiwan, May 31-June 2, 2013.
2. enq-Ruey Horng, Ming-Shyan Wang*, Tai-Rung
Lai, and Sergiu Berinde, “A Neural Observer for the Sensorless Speed Control of
Servomotors,” the First International Conference on Information, Communication
and Engineering, Fuzhou, Fujian Province, P.R. China, December 15-20, 2012.
3. Ming-Shyan Wang, Wen-Yih Wang, Pei-Lin Tsai, and Ying-Shieh Kung,
“Control of Three-Finger Gripper,” 2012 CACS International Automatic Control Conference, National Formosa University, Yunlin, Taiwan, Nov.
30-Dec. 2, 2012, paper no. 1129 (Session Chair).
4. Ming-Shyan Wang, Kun-Chung Hsu, Wei-Cheng Huang, and Wei-Ting
Sung, “Sensorless Control of Permanent Magnet Synchronous Motors by Fuzzy
Logic,” The 11th International Symposium on Advanced Technology
(ISAT-Special), Tokyo, Japan, Oct. 30, pp. 95-96, 2012.
MOST Projects
2017
school
year
1. Stereo Vision Based Object Tracking and
Grasping Control for Robot Arm and Gripper (MOST 106-2221-E-218-002-,
$699,000)。
2.
Development of
Intelligent Omni-Directional AGV Based Cyber Physical System and Its On-Site
Implementation (1/3) (MOST
105-2218-E-218-002-, 105/10/01~106/09/30, $4,220,000) , Co-host: Tzuu-Hseng S. Li, Huei-Yung Lin, Ming-Yuan Shieh, Jeng-Han
Li.
2016 school year
1. Positioning and Control Based on Passive RFID
for Automated Guided Vehicle (MOST 105-2221-E-218-017-, $753,000)。
2015
school
year
1.
Flux-switching
Permanent Magnet Motor Design and Its Application to Electric Motorcycles (MOST 104-2221-E-218-025-, $768,000), Co-host: Seng-Chi Chen.
2.
Technology Alliance
for Cloud and Green Energy Based Exercise Equipments (1/3) (MOST
104-2622-E-218-003-, 104.02~105.01, $1,903,000), Co-host: Ying-Shieh Kung, Ming-Tsung Tsai,
Ching-Lung Chu, Seng-Chi Chen, Jenq-Ruey Horng, Lian-Jou Tsai.
2014
school
year
1.
Design and
Implementation of a Permanent Magnet Synchronous Motor and Its Drive for Waterwheels (MOST 103-2221-E-218-033-, $680,000), Co-host: Min-Fu Hsieh.
2013
school
year
1.
An Intelligent Meal
Assistance Robot with Interactive Autonomous Functions (3/3) (NSC
100-2632-E-218 -001 -MY3, 11,962,000), Co-host: Ying-Shieh Kung, Yih-Ran
Sheu, Shih-Chung Chen, Ming-Yuan Shieh.
2012
school
year
1. An Intelligent Meal Assistance Robot with Interactive
Autonomous Functions (2/3) (NSC 100-2632-E-218 -001 -MY3, 11,962,000), Co-host: Ying-Shieh Kung, Yih-Ran Sheu, Shih-Chung Chen,
Ming-Yuan Shieh.
Academia and Industry Collaboration Projects
2017
school
year
1. Co-host “Development of visual and interactive control for Humanoid” (MOST 106-2622-E-218-008
-CC3, $460,000, 106/11/01～107/10/31) PI:：Ming-Yuan Shieh.
2016
school
year
1. Value addition on automatic control technology and ICT (121060278 & 121060279, 106.05~10,
$120,000+72,000)。
2015
school
year
1. Co-host “Assisted feeding robot II--multi-level brain control” (121040217,
104.07.01~104.12.31, $5,100,000)。
2014school
year
1. Development of drive
system for vehicles (121040192,
104.03~104.11, $450,000)。
2. Assisted feeding robot (121030506,
103.11.15~104.02.15, $2,884,000)。
2013
school
year
1. Development of brushless
servo drive system (121030136,
103.01~103.12, $650,000)。
2012
school
year
1. Development of two-axis
brushless servo drive system by single CPU (121010480,
101.09~102.08, $300,000) 。
Patents
2012
school
year
1.
變結構馬達之驅動與切換方法，蔡明祺、王明賢、鄭銘揚、江政毅、王士豪、邵子昌，I 393342, 2013.04.11~2029.10.14.
2. 使用與頻率無關之相位延遲法提高三相霍爾訊號之解析度，蔡明祺、王明賢、鄭銘揚、邵子昌、許邦泓，I 400433, 2013.07.01~2029.02.26.
Graduated Ph. D. Dissertations
1. Ika Noer
Syamsiana, “Design
of Sensorless Motor Controller Based on Sliding Mode Observer,”
Ph. D. Dissertation, Southern
Taiwan University of Science and Technology, July,
2017.
2. Taryudi,
“Stereo Vision-Based Object Manipulation System
with Eye to Hand Calibration Using ANFIS,” Ph. D.
Dissertation, Southern
Taiwan University of Science and Technology, July,
2017.
Graduated Master Theses
1. Fu-te Lai, “Charging
System of Continuously Running Brushless DC Motor and Generator,” Master Thesis, 07.31, 2018.
2. Tse-Ming
Tsai, “Sensorless Control of Permanent Magnet Synchronous
Motor with Neural Networks and Sliding Mode Observer,” Master Thesis, 07, 2017.
3. Ruei-Jhih Hong, “Sensorless
Control Based Neural Network Phase Locked Loop Velocity Observer for
Permanent Magnet Synchronous Motor,” Master Thesis, 07, 2017.
4. Hsin-Yu Lin, “Fuzzy MTPA and Field Weakening with MTPV Control of IPMSM,” Master Thesis, 07, 2017.
5. Wei-Chin Fang, “Fuzzy MPTA and MTPV Control of
IPMSM,” Master Thesis, 07, 2016.
6. Ching-Tang Tsai, “Visual Tracking and Grasping
Object for Robot Arm and Gripper Based on Two-Camera Vision,” Master Thesis, 07, 2016.
7. Cih-Huei Shih, “Adaptive Network-Based Fuzzy
Inference Control and Sensorless Control of Brushless DC Motor,” Master Thesis, 07, 2015.
8. Chih-Hung Wang, “Design and Implementation of SynRM
Drive by Field Oriented Control,”
Master Thesis, 07, 2015.
9. Guan-Ting Lin, “MTPA Control of IPMSM Drive Using
Fuzzy Theory,” Master Thesis, 07,
2015.
10. Po-Hsiang Chuang, “Torque Ripple Reduction of Switched Reluctance Motor
Using Fuzzy Control,” Master Thesis, 07,
2015.
11. Ting-Hui Lin, “The Study of Different PWM Switching Modes for BLDC Motor,” Master Thesis, 07, 2015.
12. Shih-Yu Wu, “Development and Implementation of Electric Vehicles,” Master Thesis, 07, 2014.
13. Feng-Chi Lin, “Neural Networks Based Sensorless Sliding-Mode Control of
Permanent Magnet Synchronous Motors,”
Master Thesis, 07, 2014.
14. Cian-Yong Fong, “Design and Analysis of Brushless Permanent Magnet
Motors,” Master Thesis, 07,
2014.
15. Che-Wei Liu, “Object Shape Based Robotic Palm Control,” Master Thesis, 07, 2014.
16. Pei-Lin Tsai, “Control of Robot Palm,” Master Thesis, 07, 2013.
17. Tai-Jung Lai, “Neural Network Based Sensorless Control of PMSM Drive,” Master Thesis, 07, 2013.
18. Wei-Ting Yeh, “DSP-Based Speed Controller of BLDC Motor,” Master Thesis, 07, 2013.
19. Chien-Chi Huang, “Design and Implementation of Drives for Electric
Vehicles with Continuous Transmission and Cruise Control System,” Master Thesis, 07, 2012.
Awards
2017
school
year
1. 與李政翰老師指導學生陳彥焙、賀益興、范坤洵，以「基於多頻道LiDAR感測器之全向無人搬運車避障導航系統開發」作品參加教育部技職司「第十三屆數位訊號處理創思設計競賽」，榮獲「Microchip數位訊號處理器應用組」佳作(107.03.16)。
2016
school
year
1. 指導學生洪瑞志、蔡澤銘、林信佑，以「以數位訊號處理之全向輪自動避障無人搬運車」作品參加「2017臺灣國際創新發明暨設計競賽」，榮獲發明類社會組TIKI金牌獎暨獎金5,000元 (各組競賽成績前10%隊伍，106.07.06)。
2. 指導學生黃有德、賴福得，以「四效合一多功能冷暖氣機」作品參加「2017臺灣國際創新發明暨設計競賽」，榮獲發明類社會組銀牌獎(106.07.06)。
3. 與李政翰老師指導學生蔡澤銘、洪瑞志，以「以數位訊號處理之全向輪自動避障無人搬運車」作品參加教育部技職司「第十二屆數位訊號處理創思設計競賽」，榮獲「Microchip數位訊號處理器應用組」第三名(106.03.10)。
4. 與陳培展老師指導學生黃有德、賴福得，以「四效合一多功能冷暖氣機」作品參加教育部技職司「第十二屆數位訊號處理創思設計競賽」，榮獲「Microchip數位訊號處理器應用組」佳作(106.03.10)。
5. 與協助進食機器人研究團隊：龔應時、許毅然、陳世中、謝銘原，指導學生金雍庭、 吳叡霖、 張貿雄、 鍾錦任，以「信腦拈來」參加「長庚醫療財團法人2016醫療機器人比賽」，榮獲佳作(105.12.04)。
6. 指導學生洪瑞志、蔡景棠，以「基於雙目視覺之機械手掌臂追蹤與抓取物體」論文參加「2016台灣智慧型機器人研討會」，榮獲最佳研討會論文競賽第三名 (105.09.01)。
2015
school
year
1.
指導學生洪瑞志、蔡澤銘、林信佑，以「無刷直流馬達之適應性網路模糊推論控制暨無感測控制」作品參加「2016臺灣國際創新發明暨設計競賽」，榮獲發明類社會組TIKI金牌獎暨獎金5,000元 (各組競賽成績前10%隊伍，105.07.06)。
2.
指導學生蔡澤銘、簡蔚任、鄭仲倫、蘇育玄，以「以數位訊號處理之全方位節能自動化除草機」作品參加教育部技職司「第十一屆數位訊號處理(DSP)創思設計競賽」，榮獲綠能與控制應用組第三名 (105.03.11)。
3.
指導學生方偉晋、李維揚、張彥、林信佑，以「以Microchip dsPIC晶片實現電動載具之容錯功能」作品參加教育部技職司「第十一屆數位訊號處理(DSP)創思設計競賽」，榮獲「Microchip數位訊號處理器應用組」佳作(105.03.11)。
4.
指導學生洪瑞志、蔣駿憲、陳彥焙，以「無刷直流馬達之適應性網路模糊推論控制暨無感測控制」作品參加教育部技職司「第十一屆數位訊號處理(DSP)創思設計競賽」，榮獲「Microchip數位訊號處理器應用組」佳作(105.03.11)。
2014
school
year
1.
指導學生蔡景棠、蔡澤銘、陳尚璆、林運昇，以「具電子變速及容錯功能之電動載具」作品參加「2015臺灣國際創新發明暨設計競賽」，榮獲發明類社會組iVAN金牌獎暨獎金5,000元 (各組競賽成績前10%隊伍，104.07.05)。
2.
指導學生方偉晋、石幸昀、陳尚璆、洪瑞志，以「直流無刷馬達之轉子磁極初始區間估測及其無感測器控制」作品參加「2015臺灣國際創新發明暨設計競賽」，榮獲發明類社會組金牌獎(104.07.05)。
3.
指導學生王智弘、林冠廷，以「適應性電動機車」作品參加教育部技職司「第十屆數位訊號處理(DSP)創思設計競賽」，榮獲「Microchip數位訊號處理器應用組」佳作(104.03.13)。
2013
school
year
1.
指導學生施慈暉、方偉晋，以「使用與頻率無關之方波相位延遲法」作品參加「2014金門國際創新發明暨設計競賽」(2014 Kinmen International Invention and Design Fair)，榮獲發明類社會組iVAN金牌獎暨獎金10,000元 (各組競賽成績前10%隊伍，103.07.05)。
2.
指導學生吳士瑜、馮謙詠、王沼奇，以「簡易無人搬運車」作品參加教育部技職司「第九屆數位訊號處理(DSP)創思設計競賽」，榮獲綠能與控制應用組佳作(103.03.14)。
3.
指導學生施慈暉、王智弘、林朝元、何衢櫸，以「變頻冷氣之模擬」作品參加教育部技職司「第九屆數位訊號處理(DSP)創思設計競賽」，榮獲德州儀器數位訊號處理器應用組佳作(103.03.14)。
2012
school
year
1.
指導學生蔡沛霖、黃泓霖、蔣志嵩、曹哲強，以「機器人手掌指控制」作品參加教育部技職司2012「第八屆數位訊號處理(DSP)創思設計競賽」，榮獲綠能與控制應用組第三名暨 「TI 德州儀器獎」(102.03.15)。
2.
指導學生黃韋誠、林奉機、方偉晉、王嘉帷，以「以數位訊號處理器為基礎之倍頻電路設計」作品參加教育部技職司2012「第八屆數位訊號處理(DSP)創思設計競賽」，榮獲綠能與控制應用組佳作(102.03.15)。
3.
與企管系 楊雪蘭老師指導學生黃韋誠、黃泓霖、鄭夷涵、黃雅琪、陳柔諭，以「Green Driving電動機車」作品參加「中技社101年度科技獎學金」活動，榮獲科技創意組15萬獎學金(101.12.01)。
其他項目
2017
school
year
1. 2016年榮獲科技部105學年度「補助大專校院獎勵特殊優秀人才」研究或產學績優獎勵。
2016
school
year
1. 2015年榮獲科技部104學年度「補助大專校院獎勵特殊優秀人才」研究或產學績優獎勵。
2015
school
year
1. 2014年榮獲國科會103學年度「補助大專校院獎勵特殊優秀人才」研究或產學績優獎勵。
2014
school
year
1. 2013年榮獲國科會102學年度「補助大專校院獎勵特殊優秀人才」研究或產學績優獎勵。
2013 school
year
1. 2012年榮獲國科會101學年度「補助大專校院獎勵特殊優秀人才」研究或產學傑出獎勵。