目前位置:主選單>師資介紹>專任老師>吳俊緯

吳俊緯


姓名:吳俊緯(Wu,Jim-Wei)
職稱:助理教授
學歷:國立臺灣大學電機博士
信箱:jimweiwu@stust.edu.tw
辦公室分機:3327
辦公室:B103-1
專長:先進控制系統、光機電整合系統、奈米檢測系統開發、工業機器手臂設計與控制
本學年授課課程:人工智慧與深度神經網路、微處理機原理與實習、電路學、微積分
 

期刊論文

1.     Jim-Wei Wu*, Yu-Ting Lo, Wei-Chih Liu, Da-Wei Liu, Kuang-Yao Chang, and Li-Chen Fu, “Adaptive Tilting Angles to Achieve the High-Precision Scanning of a Dual Probes AFM,” Asian Journal of Control, Vol. 20, No. 4, pp. 1339-1351, 2018. (SCI, IF=2.005). (第一、通訊作者/ First and Corresponding author, Regular Paper)

2.     Jim-Wei Wu, Yi-Ting Lin, Yu-Ting Lo, Wei-Chih Liu, Kuang-Yao Chang, Da-Wei Liu, and Li-Chen Fu, “Effective Tilting Angles for a Dual Probes AFM System to Achieve High-Precision Scanning,” IEEE/ASME Transactions on Mechatronics, vol. 21, no. 5, pp. 2512-2521, 2016. (SCI, IF=4.943). (第一作者/ First author, Regular Paper)

3.      Jim-Wei Wu, Chii-Rong Yang, and Che-Yi Huang, “Development of a novel plasma scanning technique for high-quality anodic bonding,” Journal of Micromechanics and Microengineering, 26, 045005 (10pp), 2016. (SCI, IF=2.141). (第一作者/ First author, Regular Paper)

4.      Jim-Wei Wu, Yi-Ting Lin, Yu-Ting Lo, Wei-Chih Liu, and Li-Chen Fu, “Lissajous Hierarchical Local Scan to Increase the Speed of Atomic Force Microscopy,” IEEE Transactions on Nanotechnology, vol. 14, no. 5, pp. 810-819, 2015. (SCI, IF=2.857). (第一作者/ First author, Regular Paper)

5.      Chih-Lieh Chen, Jim-Wei Wu, Yi-Ting Lin, Li-Chen Fu, and Mei-Yung Chen, “Precision Sinusoidal Local Scan for Large Range Atomic Force Microscopy with Auxiliary Optical Microscopy,” IEEE/ASME Transactions on Mechatronics, vol. 20, no. 1, pp. 226-236, 2015. (SCI, IF=4.943). (第二作者/ Second author, Regular Paper)

6.      Jim-Wei Wu, Jyun-Jhih Chen, Ming-Li Chiang, Jen-te Yu, and Li-Chen Fu, “Design and Control of Phase-Detection Mode Atomic Force Microscopy for Reconstruction of Cell Contours in Three-Dimensions,” IEEE Transactions on Nanotechnology, vol. 13, no. 4, pp. 639-649, 2014. (SCI, IF=2.857). (第一作者/ First author, Regular Paper)

7.      Chii-Rong Yang, Jim-Wei Wu*, Long-Yin Chang “Design and implementation of a novel conical electrode for fast anodic bonding,” Journal of Micromechanics and Microengineering, 24, 105003 (8pp), 2014. (SCI, IF=2.141). (通訊作者/Corresponding author, Regular Paper)

8.      Jim-Wei Wu, Kuan-Chia Huang, Ming-Li Chiang, Mei-Yung Chen, and Li-Chen Fu, “Modeling and Controller Design of a Precision Hybrid Scanner for Application in Large Measurement-Range Atomic Force Microscopy,” IEEE Transactions on Industrial Electronics, vol. 61, no. 7, pp. 3704-3712, 2014. (SCI, IF=7.503). (第一作者/First author, Regular Paper)

9.      Jim-Wei Wu, Chii-Rong Yang, Mao-Jung Huang, Cheng-Hao Yang, and Che-Yi Huang, “Realization of ultrafast and high-quality anodic bonding using a non-contact scanning electrode,” Journal of Micromechanics and Microengineering, 23, 075008 (9pp), 2013. (SCI, IF=2.141). (第一作者/First author, Regular Paper)

 

研討會論文

1.      Da-Wei Liu, Huang-Chih Chen, Kuang-Yao Chang, Meng-Hao Chou, Yi-Lin Liu, Jim-Wei Wu, Ming-Li Chiang, and Li-Chen Fu, “Design of a High-speed and High-precision Hybrid Scanner with a New Path Planning Strategy Based on Spatial Entropy,” Proc. of American Control Conference, pp. 2946-2951, Milwaukee, WI, U.S.A., June 27-29, 2018.

2.      Kuang-Yao Chang, Da-Wei Liu, Meng-Hao Chou, Jim-Wei Wu, Yi-Lin Liu, and Li-Chen Fu, “A Fast CLSM Undersampling Image Reconstruction Framework with Precise Stage Positioning for Random Measurements,” The 2017 Asian Control Conference (ASCC 2017), Gold Coast, Australia, Dec. 17–20, 2017.

3.      Wei-Chih Liu, Jim-Wei Wu, Da-Wei Liu, Kuang-Yao Chang, Meng-Hao Chou, and Li-Chen Fu “A Self-Designed Laser Scanning Differential Confocal Microscopy with a Novel Vertical Scan Algorithm for Fast Image Scanning,” The 20th World Congress of the International Federation of Automatic Control (IFAC 2017), Toulouse, France, July 9-14, 2017.

4.      Wei-Chih Liu, Da-Wei Liu, Jim-Wei Wu, Kuang-Yao Chang, Meng-Hao Chou, and Li-Chen Fu “Precision Sinusoidal Tracking for Galvanometer Scanner with Smith Predictor-based Adaptive Sliding Mode Control,” The International Automatic Control Conference (CACS 2016), Taichung, Taiwan, Nov. 9-11, 2016. (Best Student Paper Award, Third Prize)

5.      Wei-Chih Liu, Kuang-Yao Chang, Jim-Wei Wu, Da-Wei Liu, Meng-Hao Chou, and Li-Chen Fu “A Galvanometer Scanner with Smith Predictor-based Controller for Fast Tracking,” The 2nd International Conference on Electrical Engineering and Computer Science (ICEECS 2016), Taipei, Taiwan, Oct. 28-29, 2016.

6.      Yu-Ting Lo, Jim-Wei Wu, Wei-Chih Liu, Da-Wei Liu, Kuang-Yao Chang, and Li-Chen Fu “Adaptive Tilting Angles for a Dual-Probe AFM System to Increase Image Accuracy,” The IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, July 12-15, 2016.

7.      Jim-Wei Wu, Yu-Ting Lo, Wei-Chih Liu, and Li-Chen Fu, “Lissajous Scan Trajectory with Internal Model Principle Controller for Fast AFM Image Scanning,” Proc. of the SICE Annual Conference, Hangzhou, China, July 28-30, 2015.

8.      Chii-Rong Yang, Richard JT Lin, Yu-En Chen, and Jim-Wei Wu, “Preparation of Graphene/diamond-like carbon composite films by atmospheric pressure chemical vapor deposition,” The 7th annual Recent Progress in Graphene and Two-dimensional Materials Research Conference (RPGR), Lorne, Victoria, October 25-29, 2015.

9.      Yi-Ting Lin, Yu-Ting Lo, Jim-Wei Wu, and Li-Chen Fu, “A Dual Probes AFM System with Effective Tilting Angles to Achieve High-Precision Scanning,” Proc. of 53st IEEE Conference on Decision and Control, Los Angeles, California, Dec. 15-17, 2014.

10.  C. R. Yang, S. S. Wu, and J. W. Wu, “Fabrication of a Graphene/conductive nanofibers based electrochemical capacitor via electrospinning and electrospray,” The 6th international conference on recent progress in graphene research (RPGR), 21-25 Sep. 2014, Taipei, Taiwan, PH-01, 2014.

11.  C. R. Yang, S. C. Chang, T. P. Teng, and J. W. Wu, “Preparation of high-quality graphene sheets under electrochemical/mechanical hybrid exfoliation,” The 6th international conference on recent progress in graphene research (RPGR), Sep. 21-25, 2014, Taipei, Taiwan, PA-10, 2014.

12.  Chih-Lieh Chen, Jim-Wei Wu, Yi-Ting Li, and Li-Chen Fu, “Precision Sinusoidal Local Scan for Large Range Atomic Force Microscopy with Auxiliary Optical Microscopy,” Proc. of 52st IEEE Conference on Decision and Control, Florence, Italy, Dec. 10-13, 2013.

13.  Jim-Wei Wu, Jyun-Jhih Chen, Kuan-Chia Huang, Chih-Lieh Chen, Yi-Ting Lin, Mei-Yung Chen, and Li-Chen Fu, “Design and Control of Phase-Detection Mode Atomic Force Microscopy for Cells Precision Contour Reconstruction under Different Environments,” Proc. of American Control Conference, Washington DC, USA, June 17-19, 2013.

14.  Kuan-Chia Huang, Jim-Wei Wu, Jyun-Jhih Chen, Chih Lieh Chen, Mei-Yung Chen, and Li-Chen Fu, “Development of a Large Scanning-range Atomic Force Microscope with Adaptive Complementary Sliding Mode Controller,” Proc. of 51st IEEE Conference on Decision and Control, Hawaii, USA, Dec. 10-13, 2012.

15.  Jim Wei Wu, Yuan-Zhi Peng, Jyun-Jhih Chen, Kuan-Chia Huang, Mei-Yung Chen, Li-Chen Fu, “Design and Implementation of a Large Measurement-range AFM Scanning System,” Proc. of American Control Conference, Montreal, Canada, June 27-29, 2012.

16.  Yuan-Zhi Peng, Jim-Wei Wu, Kuan-Chia Huang, Jyun-Jhih Chen, Mei-Yung Chen, and Li-Chen Fu, “Design and Implementation of an Atomic Force Microscope with Adaptive Sliding Mode Controller for Large Image Scanning,” Proc. of 50th IEEE Conference on Decision and Control, Orlando, Florida, USA, December 12-15, 2011.

17.  Kuan-Lin Huang, Yuan-Zhi Peng, Jim-Wei Wu, Mei-Yung Chen, and Li-Chen Fu, “Design and Implementation of an Electromagnetically Damped Positioner with Flexure Suspension.,” Proc. of IEEE Multi-Conference on Systems and Control, Denver, USA, September 28-30, 2011.

18.  Jim-Wei Wu, Mei-Yung Chen, Shao-Kang Hung, Li-Chen Fu, “A Compact Tapping Mode AFM with Sliding Mode Controller for Precision Image Scanning,” Proc. of 8th Asian Control Conference, Kaohsiung, Taiwan, May 15-18, 2011.

19.  Shan-Tsung Lee, Kuan-Lin Huang, Jim-Wei Wu, and Li-Chen Fu, “Design and Control of Long Travel Range Electromagnetically Actuated Positioning Stage with Application to Precise Machining, Proc. of IEEE Multi-Conference on Systems and Control, pp.2219-2224, Yokohama, Japan, September, 8-10, 2010.

20.  Shih-Hsun Yen, Jim-Wei Wu, and Li-Chen Fu, “Apply Tapping Mode Atomic Force Microscope with CD/DVD Pickup Head in Fluid,” Proc. of American Control Conference, pp. 6549-6554, Baltimore, MD, U.S.A., June 30-July 2, 2010.

21.  楊啟榮、吳俊緯、賴禹承、張智傑, “石墨烯應用於染料敏化太陽能電池之研製,” 33th 中國機械工程學會全國學術研討會, 新竹, 臺灣, 20161234日。

22.  楊啟榮、陳姿穎、黃俊凱、吳俊緯, “界面活性劑對電化學暨機械剪切複合剝離石墨烯之影響,” 33th 中國機械工程學會全國學術研討會, 新竹, 臺灣, 20161234日。

23.  楊啟榮、吳俊緯、靳皓文、賴禹承, “陽極接合轉移石墨烯之技術開發,” 32th 中國機械工程學會全國學術研討會, 高雄, 臺灣, 2015121112日。

24.  楊啟榮吳俊緯程科翔羅詩涵, “Polystyrene/Polyaniline/Graphene複合材料之超級電容開發,” 32th 中國機械工程學會全國學術研討會, 高雄, 臺灣, 2015121112日。

25.  楊啟榮、曾釋鋒、陳昱廷、陳姿穎、吳俊緯, “氧化石墨烯製備與其雷射還原,” 32th 中國機械工程學會全國學術研討會, 高雄, 臺灣, 2015121112日。

26.  楊啟榮、張天立、吳思賢、程科翔、吳俊緯, “石墨烯複合導電奈米纖維應用於超級電容之製作,” 31th 中國機械工程學會全國學術研討會, 逢甲大學, 臺中, 臺灣, 20141267日。

27.  楊啟榮、鄧敦平、張聖章、陳昱廷、吳俊緯, “結合電化學法與機械剝離之石墨烯片製備技術開發,” 31th 中國機械工程學會全國學術研討會, 逢甲大學, 臺中, 臺灣, 20141267日。

28.  Jim-Wei Wu and Chii-Rong Yang, “Development of a Novel Ultrafast Anodic Bonding Technique,” The 17th Nano and Microsystem Technology Conference, Taichung, Taiwan, August 22-23, 2013.

 

專利

1.      發明人/Inventor: 傅立成、吳俊緯、林奕廷、羅宇廷、劉韋志; 發明名稱/Title : 原子力顯微鏡掃描方法/ SCANNING METHOD FOR AN ATOMIC FORCE MICROSCOPY; Patent Pending No. : I 582429; 2017/05/11.

2.      發明人/Inventor: 傅立成、吳俊緯、陳志烈、林奕廷、羅宇廷; 發明名稱/Title : 用於一光學輔助原子力顯微鏡系統的掃描樣本的方法及其裝置/ METHOD OF SCANNING SAMPLE FOR ATOM FORCE MICROSCOPE SYSTEM; Invention Patent No. : I 519197; 2016/02/01.

3.      發明人/Inventor: 楊啟榮、范志文、黃孟書、吳俊緯、張淑芳; 發明名稱/Title : 一種模組化壓床設備/A PRESS MACHINE AND A MODULE; Invention Patent No. : I 331082, 2010/10/01.

4.      發明人/Inventor: 楊啟榮、吳俊緯、張淑芳; 發明名稱/Title : 一種陽極接合方法與設備/ A METHOD AND EQUIPMENT FOR ANODIC BONDING; Invention Patent No. : I 308135; 2009/04/01.

5.      發明人/Inventor: 吳俊緯、曾瓅、張家熏、王文志、蒯光國; 發明名稱/Title : 用於偏振磁阻式半導體晶圓片的裝置和製造磁性半導體元件的方法/ Apparatus for Polarizing a Semiconductor Wafer and Method for Fabricating a Magnetic Semiconductor Device; 台灣(T12073)/美國(US8487) , 2019. (台積電/申請中).


 

得獎紀錄

107學年度

1.      台積電先進設備研發專業組年度競賽 (佳作獎)

106學年度

1.      行政院科技部博士後研究人員學術著作獎 (研究獲獎)

105學年度

1.      中華民國自動控制學會 (最佳論文獎)

103學年度

1.      國立臺灣大學電機所年度論文競賽 (最佳博士論文獎)

2.      海峽兩岸上銀科技博士論文競賽 (優秀獎)

101學年度

1.      國立臺灣師範大學年度傑出學生選拔 (傑出學生獎)

2.      中華民國斐陶斐榮譽學會 (榮譽會員)

3.      國立臺灣師範大學專題競賽 (特優獎)

4.      國立臺灣師範大學 (木鐸獎)

5.      中華民國自動工程協會環保車大賽 (佳作獎)